Leil® Patio S 4-5 Person Outdoor Sauna

No. The price shown is for the sauna without a heater. Choose your heater in "Design your sauna" on this page; the price updates as you choose.

Final wiring must be completed by a qualified electrician; electrical connection is not included with sauna assembly.

The Patio S is designed for 4-5 people, with an L-shaped bench layout that makes the space feel more open and sociable than many traditional compact outdoor saunas.

If your sauna has exposed or untreated exterior timber, use a breathable, UV-resistant and water-resistant exterior wood treatment. We recommend Tikkurila Valtti Plus Kesto or Tikkurila Valtti Plus Color. If you prefer a clear, natural finish, Osmo UV Protection Oil is a good option.

Apply the treatment after assembly and before regular use, then inspect the timber annually and re-treat it as required for the product and your site’s exposure.

For sauna-room walls, window frames and door frames, use Tikkurila Supi Sauna Finish or Tikkurila Supi Sauna Wax. For benches and backrests, use Tikkurila Supi Laudesuoja Bench Protection. Never use ordinary exterior paint, varnish or household wood treatments inside the heated sauna room.

If your sauna has factory-finished or specialist cladding, follow the supplied manual and do not overcoat it unless the manufacturer confirms the product is suitable.

These recommendations are general guidance. Check both the sauna manufacturer’s manual and the treatment manufacturer’s instructions, and satisfy yourself that the product is suitable for the timber and any existing finish before applying it. If you are unsure about a colour, request samples from the manufacturer or retailer and test one on a spare timber offcut or a small, inconspicuous area first.

Buy one 2.7-litre tin (2.7 litres total) of Tikkurila Supi Sauna Finish for the sauna-room walls and ceiling, and one 1-litre tin (1 litre total) of Tikkurila Supi Laudesuoja for the benches and backrests. For untreated exterior timber, buy either two 2.7-litre tins (5.4 litres total) of Tikkurila Valtti Plus Kesto or three 0.75-litre tins (2.25 litres total) of Osmo UV Protection Oil Extra for the specified two-coat systems.

The buying calculation uses 16.47 m² interior requiring 2.37 litres, and 6.22 m² of bench timber requiring 0.89 litres, with 15.9 m² outside requiring 4.57 litres of Valtti or 2.03 litres of Osmo. It uses the lower published coverage rate and one coat inside, two coats on untreated exterior timber, with a 15% allowance. Glass, roof shingles or membranes, the underside and confirmed factory-painted trim are excluded.

These are conservative buying allowances. Follow the current label and technical sheet for the product you choose; if its coverage or coat count differs, use those figures instead.

The windows are double glazed. The sauna door is different: it uses 8mm tempered single glazing, so the door itself is not double glazed. This is the standard glazing specification across the Patio range.

The L-shaped benches make the sauna feel more spacious and flexible in use. It allows for a more social seating arrangement, while still giving enough room for users to stretch out and relax.

Yes. The Patio S is available with either wood-fired or electric heater options, allowing you to choose between a more traditional sauna ritual or a more convenient electric setup.

Yes. Depending on your preference and site access, the Patio S can be supplied either as a flat-pack sauna for on-site assembly or as a fully assembled unit.

The Patio S should be installed on a solid, level, well-drained base that is at least the full footprint of the sauna: 2390 mm x 2390 mm. In practice, we would recommend allowing a little extra tolerance around this footprint during planning and construction so the base is fully supportive and easier to work with during installation.

The sauna itself weighs approximately 950 kg. For base planning, we would suggest allowing around 100 kg per person for up to 5 users, giving a sensible fully loaded working estimate of around 1450 kg in total.

Suitable base options can include a concrete pad, paving, tiles, or structurally suitable decking, provided the surface is flat, stable, and able to support the load without movement. We also recommend ensuring good drainage so water does not collect around the base of the sauna.

The base should also be positioned far enough away from any walls, fences, or other obstructions to allow access for future wood treatment and maintenance, and to ensure the fuse box can still be accessed when needed.

Yes. We can provide a professional installation service if you would prefer not to assemble the sauna yourself. The final cost depends on your location and access requirements.

The Patio S is available with a choice of bronze, black, or mirror glass, allowing you to tailor the look and privacy level to suit your outdoor space.

Yes. The Patio S is designed for outdoor use throughout the year, with durable Thermowood construction and an insulated EPDM roof designed to perform well in changing weather conditions.

No. Our installation team can assemble the sauna, but the heater and any other electrical components must still be connected by a qualified electrician.

You will need a suitable electrical supply and, at minimum, an isolator switch. Full details are provided in the Electrical Supply section on the product page.

Yes. Any qualified electrician should be able to connect the sauna, provided they follow the electrical requirements listed in the Electrical Supply section of the product page.

After you place your order, we also send further information that you can pass on to your electrician.

In some cases, we may be able to share details of electricians who have connected saunas for previous customers.

Availability will depend on your location, and you are also welcome to use your own qualified electrician.

Assembly time depends on the model, access and site conditions. Many outdoor saunas can be assembled in around one day, while larger or more complex models may take longer.

Use the Request an Installation Quote link under Add to Cart and complete the form. We will confirm the expected installation time with your quote.

Yes. Our installation team uses specialist carpenters and installers who are experienced in assembling outdoor saunas, which is one of the reasons many customers prefer professional installation.

No. We do not carry out site visits.

To request an installation quote, use the Request an Installation Quote link under Add to Cart and complete the form with photos, measurements, site plans, access details and the proposed sauna location. Our installation team will use that information to assess access, base preparation and positioning, and flag any obvious issues before installation.

In outdoor saunas, it is normal for the timber structure to respond to changes in temperature, humidity, and ambient conditions over time. This can occasionally cause minor movement in the door opening, which may affect how the door closes or sits within the frame.

For this reason, sauna door hinges are designed to be adjustable. Minor door or hinge alignment adjustments over time are normal and should be carried out in line with the manual as part of routine ownership maintenance, rather than being treated as a product fault.

We do not currently have a full showroom, but many of our existing customers are happy to show their sauna to prospective buyers.

If you would like to see one in person, please contact us and we can try to arrange a viewing with a customer in or near your area.

Yes. Outdoor saunas are not maintenance-free.

As a minimum, owners should expect to inspect and re-treat exposed timber at least every 12 months, or sooner if the manufacturer manual and local conditions require it.

You should also expect to make minor door or hinge adjustments over time in line with the manual, as timber structures naturally move slightly with changes in temperature and humidity.

In coastal or sea-air environments, exposed metal parts should be checked more regularly and protected with a rust-proof treatment such as WD-40 or another suitable anti-corrosion product.

Sauna heaters also require maintenance in line with the manufacturer manual. This normally includes periodically checking, washing, and restacking the stones, and in the longer term electric heater elements may need replacing if they wear out.

We do not currently offer a formal maintenance programme.

Yes. Our traditional saunas are suitable for commercial use, and we already supply many commercial customers.

Commercial use requires a regular maintenance regime, as it would with any sauna. This includes cleaning the sauna, inspecting and maintaining the heater stones, and re-treating or painting the timber when required. The frequency will depend on usage, location and the manufacturer's maintenance instructions.